- Видео 3
- Просмотров 48 657
Harrison Chandler
Добавлен 27 авг 2012
VW T4 Intermittent Starting Problem Fault TDI 2.5TDI Volkswagen Transporter Random Starting Issue
Had issues with starting for a few months and couldn't work out what it was.
The van would have issues starting randomly after being sat for more than half an hour or so. It would start quite quickly and then slowly die as it tries to stay running. Revs slowly drop until it stops. Then starting it again was hard, would take around 5 seconds of turning it over to eventually get a groggy start again.
==The Oil Light would be flashing and Battery Light would be on after failed starts.==
I thought it was the fuel sender that's in the fuel tank that prevents the fuel running back into the tank from the fuel lines; they are prone to cracking as they are a mix of metal pipes and plastic that can b...
The van would have issues starting randomly after being sat for more than half an hour or so. It would start quite quickly and then slowly die as it tries to stay running. Revs slowly drop until it stops. Then starting it again was hard, would take around 5 seconds of turning it over to eventually get a groggy start again.
==The Oil Light would be flashing and Battery Light would be on after failed starts.==
I thought it was the fuel sender that's in the fuel tank that prevents the fuel running back into the tank from the fuel lines; they are prone to cracking as they are a mix of metal pipes and plastic that can b...
Просмотров: 52
Видео
Changing a BMW 1 series E87 fuel flap/hinge replacement (In less than 10 minutes)
Просмотров 48 тыс.7 лет назад
The fastest way to change a 1 series fuel flap, by far! I've been putting it off for months because of the long winded ways of doing it that I found on the net. There are 4 circles you can pierce through to leaver the inside clips off the body work! Pierce the 4 holes. Twist central locking gromit anti-clockwise to then pull out. Lever the 2 left clips free whilst pulling and you should notice ...
So instead of actually showing it you are just narrating what you have done? Useless
Thank you so much! This gotta work
You don't have to make holes, I put a hook in the lock hole.And I pulled harder, and then two clips came out, then I stuck my fingers in and i pulled slightly up and down. It came out smoothly, so I put it back.
Ah that's good. I should have tried that first!
Eu am scos-o fără sa dau gauri, am băgat un cârlig în gaura de la încuietoare și am tras, apoi am smuso cu degetele la împrejur, foarte simplu
You pierced it with a screwdriver? Or you drilled it and then put the screwdriver into the holes?
Sorry mate I'm super late on this. But I used a very slim screwdriver and just lined it up with the marks on the thing and punched it through.
Thanks mate I did it on mine last month it took all of ten minutes with the hole punch method and just ragging it out are you on babyBMW.net? There’s some other how to things on there as well
Annoyingly, could NOT get mine to shift, even though I had all the clips pushed out of the way, very odd.
Excellent, thanks. From Australia
Cheers man, just done mine in around 10 mins after watching your video...
Very helpful. Did only take 10 mins to replace. Thanks.
Thanks so much for the info bro. Me and my friend were able to get the flap changed in about 20-25 mins thanks to your help. Didn't even have to pierce a hole in the seal, the whole thing jus popped out once we broke the 4 clips. Maybe we were just lucky in my case. Thanks again bro, info really helped.
Alex O no problem, mate. It just made sense to make a video for people to save them hassle. I'm glad it helped!
Top man. I knew there would be an easier way. I was thinking of butchering it. Thanks